background image

5.

 

If the air supply system is not equipped with an air-line lubricator, 
a drop of high quality line lubricant must be manually added to the 
air inlet at regular intervals.

 

6.

 

The air-line filter located at the back of the unit must be kept clean 
at all times.

 

 

This unit should have the following periodic maintenance performed 
by a Walter Surface Technologies. Authorized service center:

 

 

1.

 

Worn or damaged parts must be  replaced.

 

2.

 

The filling valve seal has to be replaced at least once a 
year.

 

3.

 

The piston seals must be replaced at least once a  year. 

 

 

53-M 044

 

WARRANTY POLICY

 

All Walter products are inspected and tested before shipment and 
are warranted to be free from any defect in material and faulty

 

Workmanship. Should any malfunction occur within 

Two (1) years

 

from the date of original purchase, return the complete unit prepaid, 
with proof of purchase, to the nearest Walter Surface Technologies 
Authorized Service Center. If an examination shows that the 
malfunction was caused by defective material or faulty workmanship, 
Walter Surface Technologies will repair (or at our option, replace) 
without charge. This warranty does not apply when normal 
maintenance is required, repairs or replacements have been made or 
were attempted by anyone other than Walter Surface Technologies 
authorized service personnel and does not cover any damage caused 
by accidents, modifications, use of 

improper fluids,

 accessories, 

abuse or misuse, which also includes overloading the tool beyond its 
rated capacity as well as its continued use after partial failure. No other 
warranty, written or verbal is  authorized.

 

In no event shall Walter Surface Technologies. be liable for any indirect, 
incidental or consequential damages from the sale of the product. This 
disclaimer applies both during and after the term of this warranty.

 

This warranty gives you specific rights. The provisions contained 
in this warranty are not intended to limit, modify, take away from, 
disclaim or exclude any warranties set forth in any Provincial or 
Federal legislation. To the extent required by law, the provisions  in

 

any Provincial or Federal legislation with respect to warranties takes 
precedence over the provisions in this warranty.

 

 
 

5

 

Содержание 57D000










Отзывы: