28
2. Important safety information
WARNING
Danger of electric shock and fire caused by short circuit or malfunction.
A short circuit may be caused by defective cables or moisture. In case of a
short-circuit the cable wires may heat up to such an extent, that the insulati-
on or even the wires themselves will melt. This may cause fire.
■
Do not operate the device with wet hands or feet.
■
Operate the equipment only in dry environments.
■
Do not use the equipment outside.
■
Make sure that cables and cable wires are free of damage. This could
be caused e.g. by exposure to heat, chemical or mechanical influences
such as chafing, buckling, tearing, rolling over or chewing pets.
■
Take care to prevent the equipment from dropping down.
If the device has dropped down on the floor have it inspected by a skilled
electrician before you switch it on again.
■
Should the equipment be damaged or defective, or if you notice a
scorching smell:
Do not operate the equipment with damaged housing. Do not open the
equipment. Do not repair the equipment yourself. Have the device only
repaired by a skilled electrician
■
Always keep your device in good condition, as specified in these
instructions for use.
3. Unpacking and checking the device
1. Carefully unpack the scope of delivery.
2. Check whether the scope of delivery is complete:
• Walimex pro Operator TTL T-S (Batteries not included)
3. Check whether the scope of delivery is free of damage.
NOTICE
If the scope of delivery is incomplete or damaged, please contact
