Walmag NEO Series, Руководство по эксплуатации

Страница: 6 / 60

OPERATING AND MAINTENANCE INSTRUCTIONS FOR NEO AND NEOHOT LINE
PREFACE
You have purchased a WALMAG MAGNETICS lifting magnet.
We thank you for the trust you have placed in our product.
These instructions contain all the information required for safe
and optimum use of the lifting magnet. Read the instructions
carefully and follow the directions. Keep the instructions in a
safe place close to the workplace.
On delivery check that the magnet is undamaged and complete.
If the equipment is damaged or incomplete contact your
supplier immediately.
NEVER USE A DAMAGED OR INCOMPLETE MAGNET!
NEO and NEOHOT are guaranteed for a term of 60 months on the magnetic system. The guarantee is not applicable to shortco-
mings that can be wholly or partially attributed to:
+
failure to comply with the operating and maintenance instructions or use considered as being other than normal
+ ormal wear
+
modification or repairs not performed by WALMAG MAGNETICS or authorised agent
In all correspondence regarding your lifting magnet always state the information displayed on the type plate.
1. Magnet
2. Instruction plate + type plate
3. Lifting eye
4. Handle
5. Handle lock plate
6. Pole shoes
IN CASE OF VERTICAL HANDLING IS THE LOAD CAPACITY LIMITED TO ONLY APP. 20%. CARRY OUT THE TEST
BEFORE YOU START WITH MANIPULATION!
TYPE 150 300 600 1000 1500 2000
lenght (mm) 93 152 246 306 374 478
width (mm) 60 100 120 146 165 165
height incl. lifting eye (mm) 120 180 180 236 273 273
weight (kg) 3 10 21 40 69 90
tested lifting capacity (kg) 470 1000 1900 3200 4700 6200
workload limit for plates (kg) 150 300 600 1000 1500 2000
workload limit pipe and tube (kg) 65 150 300 500 750 1000
Ø min/max (mm) 40/100 60/200 65/200 100/300 150/350 150/350
MAGNET NEO OR
NEOHOT LINE
TEST CERTIFICATION
OPERATING AND
MAINTENANCE INSTRUCTIONS
INCL. EC DECLARATION
OFCONFORMITY
THE COMPLETE DELIVERY CONSISTS OF
NAMES OF THE MOST IMPORTANT PARTS OF THE
LIFTING MAGNET
1
2
3
4
5
6
EN