Wallpro CG-605L, Руководство по эксплуатации, Страница: 8 / 16

Battery Pack LED Indication Function (Optional)
The Battery Pack has a “SW” button and 4-step green LEDs for indicating remaining capacity status. The fuel
gauge green LED will indicate when the “SW” button is momentarily pressed.
The LED Light on the Charger
Power On (Green light flashes slowly)
Battery Low (Red light stays illuminated)
Battery charged 80% (Green light flashes rapidly)
Battery charged 100% (Green light stays illuminated)
Battery Pack temperature is too hot or too cold (Red light flashes slowly)
Battery Pack malfunction (Red and Green lights stay illuminated)
WARNING!
•
Charger is plugged into a 100-240V a.c outlet only.
•
If the battery pack is too hot or too cold, the charger will not fast charge the battery pack and the red Indicator
light is “blinking”. When the battery pack temperature returns to between 0℃ and 50℃, The charger will
automatically begin charging.
•
If both red and green indicator lights are “ON” the battery pack either does not comply or is defective. Please
contact your retailer.
•
Do not charge the battery pack in the rain, snow or a high temperature environment.
•
Do not charge battery pack when environment temperature is below 0℃ or above 40℃.
•
While charging a cool battery pack (below 0℃) in the warm indoor, leave the battery pack in the room for one
hour to warm up before starting the battery charge.
•
Remove the plug after finishing the charge.
•
The charger should be cooled at least one hour after charging three continous times.
•
Do not use a generator for charging the battery pack.
Remaining Capacity LED Indication
RC Status
LED 1 (green) 0% - 25%
LED 1, 2 (green) 26% - 50%
LED 1, 2, 3 (green) 51% - 75%
LED 1, 2, 3, 4 (green) 76% - 100%