Wallpro CG-605L, Руководство по эксплуатации, Страница: 7 / 16

Charging the Battery Pack
•
Connect the plug to the charger before charging.
•
Plug the fast charger into the power source.
•
Slide the battery pack into the charger as the arrow direction shown
on the charger.
•
Push the battery pack into place and make sure the red light on the
charger is “ON”. The battery pack is now starting the charging cycle.
•
After finishing the charging cycle, the light will turn into green. The
battery pack is now ready for use.
•
Your new battery pack is not charged. You need to charge it before
use.
•
If you try to charge a battery pack from a just-operated machine,
sometimes the charging light will not come on. If this occurs, let the
battery pack cool for a while then re-insert it and try to charge again.
•
When you charge a new battery pack or a battery pack which has not been used for a long period, it may not
accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery
pack fully after discharging it completely a couple of times.
•
Unplug the charger from the power source after finishing the charging process.
•
Remove the battery from the unplugged charger for storage.
Operating Instructions (Slide-In)
Installing or Removing Battery Pack
•
Always switch off the machine before insertion or removal of the
battery pack.
•
To remove the battery pack, push the button on the battery pack and
pull the tool unit from the battery pack in the direction shown.
•
To insert the battery pack, align the tool unit slides with the battery
pack sliding groove and push the tool unit into place. The tool unit
can slide into battery pack in two directions.
•
Do not force the battery pack when sliding it into tool unit. If
the battery pack does not slide in easily, it is not being inserted
correctly.
1
2