Revision 1
28
Product Manual PSH-30 series Hand Wash Dryer
8. Programmed Settings
The Wallgate PSH-30 operational program is supplied factory set but can be
adjusted to suit the end-user requirements.
Any service or repair work must be done by a qualified engineer. During the warranty
period, the service or repair must only be done by a Wallgate engineer or appointed
service agent. Refer to the Wallgate terms and conditions for warranty information.
The display cover must be removed to allow settings to be changed. This can be
done by removing the four M3 thumb screws from the cover either by hand or with a
flat head screwdriver (Fig 29). The panel must be replaced when the in use to
prevent ingress of water into the module.
Figure 29: Display cover removal.
