Revision 1
20
Product Manual PSH-30 series Hand Wash Dryer
Figure 16: Water connector to fascia
Figure 17: handwash hose to water connector
4) Install the 15mm push fit connector onto the 15mm stem on the back of the
bowl. For units with drinking water, the push fit is a tee connector, for other units
the push fit is a 90-degree elbow.
5) Insert the handwash water hose
(15mm male to ½” BSP female) into the water
connector. If close coupling the control module and bowl, provided 45-degree
push fit connectors should be installed between the hose and the connector to
reduce the tension on the hose.
6) For units with drinking water, connect the drinking water hose (15mm male to
15mm male) into the unused point on the tee connector. As per the handwash
hose, for close mounted installations a provided 45-degree connector should be
installed to reduce tension on the hoses.
Figure 18: Drinking water hose to water connector