Wallenstein P3 PULSE WP1624, Руководство оператора

Страница: 38 / 88

Machine Setup
WP1624 Series
Firewood Processor
38
6.3 Block Dropper
• The block dropper is mounted on the back of the splitting
hopper. When the saw cuts the end of the log off, the block
dropper helps it fall squarely into the hopper, preventing
jams.
00362
Fig. 26 –
Block Dropper
• The block dropper (1) works in conjunction with the Log
Stop guide (2).
00292
2
3
1
Fig. 27 –
Block Dropper and Log Stop Guide
1. Block dropper
2. Log stop guide
3. Lock Handles
6.3.1 Adjust the Block Dropper
Set the block dropper for typical log size. The gas struts can be
adjusted together or independent of each other.
If the log does not fall squarely into the splitting hopper, adjust
as required:
1. First try setting one strut as active. Lift the block dropper
paddle (1) and slide the end of one strut down the slot (2)
so it is inactive. No tools are required to do this.
2. If one support is not adequate, try setting both struts as
active.
3. If further adjustment is required, use tools to adjust strut at
position (3).
If the block dropper is not required altogether, retract it out of the
way. Lift and slide both base ends of the gas struts down the
slot on the support (2).
00293
1
3
2
Fig. 28 –
Block Dropper Adjustment
1. Block Dropper Arm
2. Base Support
3. Block Weight Adjustment Positions
Gas struts can be adjusted or moved
independent of each other to match block
weight.