Wallenstein LXT95 страница 10 Скачать руководство пользователя

Страница: 10 / 76

2 SAFETY

SAFETY ALERT SYMBOL

Why is SAFETY important to you?

The Safety Alert symbol identifies

important safety messages on the

Wallenstein Trailer Wood Chipper

and in the manual. When you see this

symbol, be alert to the possibility of

personal injury or death. Follow the

instructions in the safety message.

This Safety Alert symbol means

ATTENTION! BECOME ALERT! YOUR

SAFETY IS INVOLVED!

Accidents Disable and Kill

Accidents Cost

Accidents Can Be Avoided

3 Big Reasons

DANGER

- Indicates an imminently hazardous

situation that, if not avoided, will

result in death or serious injury. This

signal word is to be limited to the

most extreme situations typically

for machine components which,

for functional purposes, cannot be

guarded.

WARNING

Indicates a potentially hazardous

situation that, if not avoided, could

result in death or serious injury, and

includes hazards that are exposed

when guards are removed. It may

also be used to alert against unsafe

practices.

CAUTION

Indicates a potentially hazardous

situation that, if not avoided, may result

in minor or moderate injury. It may

also be used to alert against unsafe

practices.

SIGNAL WORDS:

Note the use of the signal words

DANGER,

WARNING

and

CAUTION

with the safety

messages. The appropriate signal word for each

message has been selected using the following
guide-lines:

Содержание LXT95













































































Результаты поиска

Содержание LXT95

Отзывы:

Похожие инструкции для LXT95

Бренды по названию

Популярные бренды

Wallenstein LXT95, Руководство оператора

Результаты поиска

Содержание LXT95

Отзывы:

Похожие инструкции для LXT95

Бренды по названию

Популярные бренды