BXS Series
3PH Self-feed Chipper
Operating Instructions
29
5.
Open the upper rotor housing and engage the rotor lock.
01345
Fig. 31 –
Rotor Housing Flange Bolt
01346
Fig. 32 –
Open Upper Rotor Housing
01347
Fig. 33 –
Engage Rotor Lock
CAUTION!
Avoid reaching into rotor compartment. Rotor
chipper blades are very sharp. If reaching inside
is necessary, use extreme care.
W003
6.
Remove jammed material from inside the rotor
compartment.
7.
Clean out the discharge chute.
8.
Inspect the lower rotor housing and clean out any debris.
9.
If required, rotate the rotor: disengage the rotor lock and
very carefully
and slowly turn the rotor by hand to be sure
there is nothing jammed between the rotor and stationary
blades.
Do not reach into the rotor housing while the
rotor is moving or unlocked.
10.
Disengage the rotor lock to close the upper rotor housing.
Fasten the rotor housing flange bolt..
WARNING!
Machine shown with shields removed for
illustrative purposes only. Never operate
machine with shields removed.
W001
