Wallbox PULSAR, Руководство по установке

Страница: 14 / 20

Step 1: Proceed to fix your charger to the wall. Insert the screws in the positions marked, starting at the top one, and continuing clockwise.
Verify that your wallbox Commander is firmly attached and insert the plugs to complete this process.
Step 2: Use the selector to choose the maximum operating current of the supply connection.
Step 3: Insert the mains supply cable through the gasket.
Step 4: Connect the power lines, neutral and protective earth using the
provided terminal blocks.
PULSAR
- installation guide en
DRILL & MOUNT 2/3
14
A B C
POSITION
CURRENT (A) 0
0 1
6
2
10
3
13
4
16
5
20
6
25
7
32
8
0
9
0
A
B
C
L1,L2 & L3 (Current-carring conductors)
N: Neutral
: Protective earth
The presented color connection is not subject
to an international standard, please always check
the power supply connection.
From left to right: