Spartan
- 31 -
Tank external filters
Filters can be installed in a ø 5 or ø 6 mm plastic tubing or 1/8" metal pipe. Ensure that the fuel pipes are clean before
installing the filter. There must be no debris or impurities between the pump and the filter as they will clog the pump.
The filter type must be selected according to the operating conditions and country-specific requirements.
Fuel filter 30015
The filter can be installed directly in the 30011 tank connection by using a ø 6 mm rubber hose (1) and 10 mm hose
binders (2). Alternatively, the filter can be installed between two ø 5 mm fuel hoses with ø 5 mm rubber hose (3) and ø
8 mm hose binders (4).
Fuel filter 30014
This filter is intended for cold conditions.
The filter can be installed directly in the 30011 tank connection by using a ø 6 mm barrel nut and 6 mm olive.
Alternatively, the filter can be installed between two ø 5 mm fuel hoses with ø 5 mm barrel nut, ø 5 mm olive and ø 2
mm support sleeve.
Fuel filter 30016
Used in countries where a metallic fuel transfer system is required. A 1/8" metal pipe is used for the installation.
Содержание Spartan
