Operation
en
Resetting the factory settings (Reset)
It is possible to restore the factory settings.
Proceed as follows:
•
Disconnect the power source.
•
Press the button “RELAY1” and keep it down.
•
Connect the unit to the power source and keep the button down for at least 10
seconds.
•
Release the button.
•
The factory settings have now been restored.
In order to control the unit remotely via web browsers you will have to restart the
unit for a GPRS link (after resetting).
Proceed as follows:
• Log in using your passwords at remote.wallas.fi
•
Choose the tab “Heater settings”
•
Press the button [Update heater settings]
•
Validation of the unit takes a couple of minutes; after the validation you will
receive a confirmation to your e-mail and a green
P
symbol is displayed on the
screen.
•
The unit is now ready for use.
D30061
- 46 -
4430
490538