00 0000000
0000000000000
Operation
en
If the validation was not successful, a red
O
symbol is displayed on the screen.
Check whether you have entered the correct SIM card number, telephone number,
and have selected the correct operator, also ensure that the
4430
unit has been
connected and a green LED is flashing with an interval of 7 seconds.
After verification click the [Update heater setting] button again to configure the
equipment.
If the GPRS signal is weak or the traffic of the operator is overcrowded registration
can take a while. Wait calmly for registration, it can take even hours before the unit
is validated and you will receive a successful registration message to your e-mail.
Registration will continue even if you shut the browser on your computer.
Registered users can change the operator and SIM card data in the [Heater Set-
tings] tab. After having entered the new information click the [Update heater setting]
button again to configure the equipment.
Wait calmly for registration, it can take even hours before the unit is
validated and you will receive a successful registration message to
your e-mail.
D30071
- 39 -
4430
490538
