![background image](http://html1.mh-extra.com/html/wallas/2000t/2000t_technical-information_3227738012.webp)
- 78 -
5 l
2024
10 l
30 l
130 l
2027
4030
4130
200 x 300 x 130 mm
380 x 195 x 210 mm
590 x 200 x 300 mm
800 x 400 x 600 mm
en
Fuel connections
Things to note about the connections
The standard length of the fuel hose is 2 m (max 8 m) 6,5’ (max 26’). Cut the fuel
hose to a length suitable for installation.
The lift height of the pump should be less than 2 m (7’); preferably 0.5 – 1 m.
The fuel pipe must always have a Wallas filter.
Country-specific requirements
The standard fuel hose is plastic. Please observe country-specific requirements
with regard to the material of the fuel hose/pipe and the fuel filter. The inner diam
-
eter of a new replacement hose should be equal to the inner diameter of the plastic
hose.
Copper pipe and metal filters are available as accessories.
Fuel feed
If the lift height exceeds 2 m, the fuel feed must be checked and, if necessary, ad-
justed. The fuel feed must also always be checked, if parts of the fuel system, such
as the pump or the electronics card, have been replaced.
Fuel system adjustments are device specific. These adjustments should only be
carried out by an authorized service shop.
Connection to a separate tank
Cap run-throughs and sintered filters are used on plastic tanks.
The fuel tank should be mounted securely.
The fuel tank should be placed close to the keel line.
The fuel connections must be tightened firmly so that the air cannot
leak into the hose. Always check the cleanliness of the connection
surfaces before tightening. Air leaks in the fuel system will cause the
device to malfunction.
(accessory)
(accessory)
(accessory)
(accessory)
Volume
length x height x width
Order code
Wallas fuel tanks
2
0
00t
Installation
D10431
490603
Содержание 2000t
Страница 7: ... 73 en 2000t Installation D10431 490603 ...