![background image](http://html1.mh-extra.com/html/wallas/2000t/2000t_technical-information_3227738017.webp)
- 83 -
2460
41
42
43
44
45
47
40
46
47
40
en
Closable lead-through 2460
The cap of the closable lead-through must be detached for installation and seal
maintenance by pressing the spring indicated by the arrow in with, for instance, a
screwdriver. Take care not to let the screwdriver slip as the spring is very stiff. Hold
the cap with your other hand when pressing in the spring. When the spring is down,
pull the cap gently out of the frame. When assembling the lead-through, ensure
that the order of the parts is correct. Also make sure that the spring goes in the cor-
rect hole in the cap. Otherwise, the lead-through cannot be closed.
Maintenance
To keep the seals from hardening, lubricate
them yearly with a heat-resistant petroleum
jelly.
Seals
Cap
Frame
Check that closeable fitting is open before starting the device.
2460
Closable lead-through.
Fastening screw M5 x 85 mm
Nut M5
Washer 5,3 x 10 mm
Gasket
4 pcs
8 pcs
4 pcs
1 pcs
Closable lead-through
Accessory bag
17676
Spacing tube
1 pcs
1 pcs
1 pcs
Washer 5,3 x 15 mm
4 pcs
Hose binder 32 - 50 mm
1 pcs
Package contents
2
0
00t
Installation
D10431
490603
Содержание 2000t
Страница 7: ... 73 en 2000t Installation D10431 490603 ...