6
Transmitter Features
4-Channel Transmitter Features:
1.
The transmitter has power indicator,
ergonometric design, and DIP switches available
for servo reversing.
2.
4-channel micro-computer encoder; PPM
modulation; output power 200mW; current
drain: 150mA;
3.
Power source: 8 x 1.2V Ni-Cd battery (9.6V
600mAh) or 8 x 1.5V
AA
dry cell battery.
Controls Identification and Function (Fig. 1/Fig.
2)
:
MODE I
1.
Left stick: Elevator / Rudder.
Controls your
helicopter forward, backward, left, and right. Push up
to fly your helicopter forward, pull down to fly
backward, push left to fly left, and push right to fly
right.
2.
Right stick: Throttle / Aileron.
Controls your
helicopter ascending, descending, moving left and
right. Push up for your helicopter to ascend; pull
down to descend, push left to move your helicopter
left, and push right to move right.
MODE II
1.
Left stick: Throttle / Rudder.
Controls your
helicopter ascending, descending, moving left and
right. Push up for your helicopter to ascend, pull down
to descend, push left to fly left, and push right to fly
right.
2.
Right stick Elevator / Rudder.
Controls your
helicopter forward, backward, left moving and right
moving. Push up to fly your helicopter forward, pull
down to fly backward, push left to move your
helicopter left, and push right to move right.
3.
Power indicator.
The indicator has three different
colors: red, yellow, and green. Green LED on means
there is enough power to fly; - green LED off and
yellow LED on indicate there is not enough power left,
so land and stop flying; - yellow LED off and red LED
on show the power is very low, so land immediately.
4.
Elevator trim.
It controls and modifies your
helicopter forward and backward. Push up to fly
forward, and pull down to fly backward.
5.
Rudder trim.
The trim controls and modifies your
helicopter bias to left and right. Move the trim left to fly
leftward, and move right to fly rightward
6.
Throttle trim.
The throttle trim controls your
helicopter’s bias in ascend and descend. Push up the trim
to ascend, and pull down to descend.
7.
Aileron trim.
The aileron trim controls your helicopter
bias to left or right . Push the trim left to fly left, and push
the trim right to fly right.
8.
Power switch.
Turns on or off the transmitter power.
Press the switch up to turn on the power, and press down
to turn off.
9.
Antenna.
Transmit the signals.
10.
Charge jack.
Charge the battery pack with current
50mA and voltage not more than 12V.
USE ONLY WITH RECHARGEABLE BATTERIES!
11.
Battery box.
Please note the polarities while
inserting the batteries.
Mode 1
Fig.1
Fig.2
Fig.3 Dip switches
