10
Drive Shaft
Set Screw
PTO Drive Shaft Yoke
1/4 x 1/4 x 1-1/4 Key
Figure 1.6: Attach PTO Drive Shaft Yoke to Snowblower Drive Shaft
9. Slide the drive shaft yoke over the drive shaft.
10. Secure the yoke to the drive shaft with a 1/4 x 2-1/2 in. bolt and nylon locknut. Tighten the nut and the
3/8 x 3/8 in. allen set screw securely over the key in the yoke.
11. Install one (1) 5/16-18 x 5/8 in. hex bolt on each side of the PTO guard, and tighten securely as shown in
Figure 1.7.
PTO Guard
Guard Mount
Bolt
Figure 1.7: Install PTO Guard
