33
H19 Hitch Lock Tension Adjustment
After installing an implement onto the hitch, the hitch lock clevis will need to be adjusted according to the
following procedure:
1. Adjust the H19 hitch lock clevis to properly secure the implement. To adjust the tension on the tongue
latch, remove the bowtie clip and the clevis pin as shown in Figure 4.10, and twist the male clevis clockwise
to tighten, or counterclockwise to loosen, as needed.
2. The hitch lock lever should travel approximately 2” at grip end after implement hitch adapter is fully seated
on implement hitch tongue as shown in Figure 4.11.
3. Repeat adjustment procedure
after first 15 minutes of operation
after installing implement.
4.
Male Clevis
2”
Figure 4.10: Hitch Lock Clevis
Figure 4.11: Hitch Lock Arm Travel
