manualshive.com logo in svg

Walker DB6660, Руководство пользователя

Поделиться
Скачать
Walker DB6660 Скачать руководство пользователя страница 68

Removal and Storage Instructions

68

REMOVAL

Removing Attachments from Implement

Hitch

Dozer Blade

1.

Park the tractor on a level surface and lower the
dozer blade.

2.

Remove the linchpin from the quick hitch latch
and place the hitch locking lever in the UN-
LOCKED position.

3.

Start the tractor engine and carefully back the
tractor away from the blade.

Detach Blade from Implement Hitch

Rotary Broom

1.

Park the tractor on a level surface and lower the
rotary broom.

2.

Extend the parking stands to raise the broom to
the transport position (so that the bristles do not
contact the ground).

3.

Remove the hairpin from the welded sleeve on
the RH side of the broom mounting bracket.  Set
the pivot lock pin in the innermost position (it
may be necessary to lift the broom head slight-
ly), and lock in place with the hairpin.

IMPORTANT: Once the broom is fully
remounted, the pivot lock pin should be set in
its  most extended position in order to allow
the broom to follow varying ground contours.

4.

Carefully lower the broom so that it rests on the
parking stands.

5.

Disconnect the broom driveline from the tractor
PTO shaft and place the driveline on its support
(located on the female hitch).

6.

Remove the linchpin from the quick hitch latch.
Place the hitch locking lever in the UNLOCKED
position.

7.

Start the tractor engine and carefully back the
tractor away from the broom.

WARNING

DO NOT attempt to remove the dozer
blade with the tractor engine running.  Dis-
engage the PTO clutch, stop the engine
and remove the ignition key.  Wait for all
movement to stop before getting off the
seat.

To prevent accidental engine starting, dis-
connect the fuel solenoid wire [diesel en-
gines] or the spark plug wire(s) [gasoline
engines].

WARNING

DO NOT attempt to remove the rotary
broom with the tractor engine running.
Disengage the PTO clutch, stop the en-
gine and remove the ignition key.  Wait for
all movement to stop before getting off the
seat.

To prevent accidental engine starting, dis-
connect the fuel solenoid wire [diesel en-
gines] or the spark plug wire(s) [gasoline
engines].

Содержание DB6660





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды