manualshive.com logo in svg

Walker DB6660, Руководство пользователя

Поделиться
Скачать
Walker DB6660 Скачать руководство пользователя страница 64

64

Maintenance Instructions

ADJUSTMENTS

Rotary Broom Drive Chain Tension

The drive chain should have 1/4 to 1/2 in. (6 to
13 mm) of slack at midspan.  Remove the chain
guard cover to check slack.  Adjust the drive chain
as follows:

1.

Loosen the chain idler nut.

Loosen Chain Idler Nut

2.

Position the chain idler so the chain has 1/4 to
1/2 in. (6 to 13 mm) of slack.

3.

Retighten the chain idler nut.

4.

Recheck the drive chain tension.

Proper Drive Chain Tension

Two-Stage Snowblower Skid Shoes

Adjust the skid shoes to allow the required clear-
ance under the blade.  On level, paved surfaces,
adjust the skid shoes to allow 3/16 to 1/4 in. (5 to
6 mm) clearance between the cutting edge and the
surface.  On uneven or gravel surfaces, allow 1/2
to 5/8 in. (13 to 16 mm) clearance, depending on the
size of the gravel. Refer to Skid Shoe Height Ad-
justment illustration.

Skid Shoe Height Adjustment

Two-Stage Snowblower Reduction Chain
Tension

Adjust the tension on the reduction chain as follows:

1.

Loosen the four (4) bolts securing the lower
sprocket support box to the reduction box hous-
ing.

2.

Position the lower sprocket support box accord-
ing to the amount of chain tension required.
The chain should have about 1/4 to 1/2 in. (6 to
13 mm) of slack.

3.

To  increase the chain tension, position the
support box lower.  To decrease the chain ten-
sion, position the support box higher.

4.

Retighten the four (4) bolts securing the support
box.

Chain Idler

Nut

Chain Idler

Drive

Chain

Chain Idler Bolt

Chain

Guard

1/4 to 1/2 in. (6 to 13 mm)

Slack at Midspan

Chain Idler

3/16 to 1/4 in. (5 to 6 mm)

Clearance for Level, Paved Surfaces

1/2 to 5/8 in. (13 to 16 mm)

Clearance for Uneven or Gravel Surfaces

Содержание DB6660





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды