manualshive.com logo in svg

Walker DB6660, Руководство пользователя

Поделиться
Скачать
Walker DB6660 Скачать руководство пользователя страница 2

Foreword

Thank you. . .for purchasing a Walker implement.  Every effort has been made to provide you with
the most reliable product on the market, and we are sure you will be among our many satisfied cus-
tomers.  If for any reason this product does not perform to your expectations, please contact us at
(970) 221-5614.  Every customer is important to us.  Your satisfaction is our goal.

Please. . .read this manual thoroughly!  This manual is to be used in conjunction with the mower
owner’s manual and the engine manufacturer's manual for the specific engine on the mower
model you are using.  Before you operate your new implement, please read this entire manual.
Some of the information is crucial for proper operation and maintenance of this product - it will help
protect your investment and ensure that the implement performs to your satisfaction.  Some of the
information is important to your safety and must be read and understood to help prevent possible
injury to the operator or others. If anything in this manual is confusing or hard to understand,
please call our service department, at (970) 221-5614, for clarification before operating or ser-
vicing this product.

This manual covers the Model IH6620 Implement Hitch, RB6650 Rotary Broom, DB6660 Dozer
Blade, SB6670 Two-Stage Snowblower, and DB6680 Debris Blower.

All shields and guards must be in place for the proper and safe operation of these imple-
ments.  Where they are shown removed in this manual, it is for illustration purposes only.  Do not
operate this product unless all shields and guards are in place.

Specifications given are based on the latest information available at the time this manual was
produced.

Walker Mfg. Co. is continually striving to improve the design and performance of its products.  We
reserve the right to make changes in specifications and design without thereby incurring any obli-
gation relative to previously manufactured products.

Sincerely, 

WALKER MANUFACTURING COMPANY

Bob Walker, President

Содержание DB6660





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды