D21d
Operating Instructions
33
Front Body Latch Release
The front portion of the tractor body hinges forward
for maintenance access and is latched down in the
OPERATING
position. To raise the body, pull the
latch release up and forward.
Front Body
Latch Release
Front Body Latch Release
Transmission Lockout Levers
The transmission lockout levers disengage the
hydrostatic transmissions. By
lifting
the lever on
top of the transmission and locking it into place
with the lockout cam, the hydrostatic transmissions
are released to permit freewheeling. By releasing
the cam and
lowering
the lever, the transmissions
are engaged for normal operation. The transmis-
sion lever in the
LOCKOUT
position is used to
enable moving the machine without the engine
running (e.g., for service). Refer to
Transmission
Lockout on page 45
for operating instructions.
Lockout
Levers
Transmission
Plunger
Lockout Lever Location
NOTE:
The transmission plunger on the side of
the transmission case (activated by the
LOCKOUT
LEVER
) must be completely released during oper-
ation of the mower, otherwise operation of the
transmission will be erratic.
Cold Start Lever (Jackshaft Drive Belt Release)
The cold start lever is used for starting the machine
in cold weather [below 40° F (4° C)]. Pulling the
lever
DOWN disengages
the jackshaft drive belt.
When the jackshaft drive belt is released, the
hydrostatic transmissions are removed from the
engine starter cranking load.
Jackshaft Drive
Engaged
Cold Start Lever - Normal Operating Position
Jackshaft Drive
Disengaged
Cold Start Lever - Cold Start Position
