Walker B23 Скачать руководство пользователя

Страница: 18 / 76

Safety Instructions

B23

SAFETY, CONTROL, AND INSTRUCTION DECALS

Safety, Control, and Instruction Decals are installed on the machine;

if any are missing, illegible, or damaged, a replacement should be ordered and installed before

putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.

Location: LH Fender

Part Number: 8600-65

1. Warning – read Operator’s Manual before

operating the machine.

2. Warning – wear eye and ear protection when

operating the machine.

3. Warning - crushing/dismemberment hazard of

bystanders.

● Do not carry passengers.

● Always stop the machine if someone enters

the area.

4. Warning – thrown object hazard.

● Keep bystanders away from the machine

when operating.

5. Warning - always be aware of what is behind

the machine before backing up.

● Do not mow in reverse unless absolutely

necessary.

● Always look down and behind when

backing up.

6. Warning – entanglement hazard.

● Keep all guards in place while engine is

running.

7. Warning – do not engage PTO clutch with PTO

shaft disconnected.

8. Choke
9. Parking Brake

● Move lever forward to engage brake.

● Move lever back to disengage brake.

Содержание B23













































































Результаты поиска

Содержание B23

Отзывы:

Похожие инструкции для B23

Бренды по названию

Популярные бренды

Walker B23, Руководство оператора

Результаты поиска

Содержание B23

Отзывы:

Похожие инструкции для B23

Бренды по названию

Популярные бренды