Walker Rider Lawnmowers MBS26 Скачать руководство пользователя страница 2

Страница: 2 / 104

Foreword

Thank you. . .

for purchasing a Walker mower. Every effort has been made to provide you with the

most reliable mower on the market, and we are sure you will be among our many satisfied custom ers.

If for any reason this product does not perform to your expectations, please contact your local dealer.

Every customer is important to us. Your satisfaction is our goal.

Please. . .

read this manual thoroughly! This manual is to be used in conjunction with the engine

manufacturer’s manual for the specific engine on the mower model you have purchased. Before you

operate your new mower, please read this entire manual. Some of the information is crucial for prop-

er operation and maintenance of this mower - it will help protect your investment and ensure that the

mower performs to your satisfaction. Some of the information is important to your safety, and must

be read and understood to help prevent possible injury to the operator or others. If anything in this

manual is confusing or hard to understand, please contact your local authorized dealer or call our

service department, at (970) 221-5614, for clarification before operating or servicing this mower.

This manual covers Model MBS26 with Kohler CH26 (26 HP) Electronic Fuel Injection (EFI) gasoline

engine or optional Kohler Command CH740 (27 HP) gasoline engine.

All shields and guards must be in place for the proper and safe operation of this machine.

Where they are shown removed in this manual, it is for illustration purposes only.

Do not operate

this machine unless all shields and guards are in place.

Specifications given are based on the latest information available at the time this manual was pro-

duced.

Walker Mfg. Co. is continually striving to improve the design and performance of its products. We

reserve the right to make changes in specifications and design without thereby incurring any obli-

gation relative to previously manufactured products.

Sincerely,

WALKER MANUFACTURING COMPANY

Bob Walker, President

Содержание MBS26









































































































Результаты поиска

Содержание MBS26

Отзывы:

Похожие инструкции для MBS26

Бренды по названию

Популярные бренды

Walker Rider Lawnmowers MBS26, Руководство пользователя

Результаты поиска

Содержание MBS26

Отзывы:

Похожие инструкции для MBS26

Бренды по названию

Популярные бренды