Walker Rider Lawnmowers MBS26 Скачать руководство пользователя страница 14

Страница: 14 / 104

Safety Instructions

Pay particular attention to any information labeled

DANGER, WARNING, CAUTION, IMPORTANT,

and

NOTE

in this manual.

When you see the Safety Alert Symbol (

), read,

understand, and follow the instructions. Fail ure to

comply with safety instructions may result in person-

al injury.

The seriousness or degree of importance of each type

of information is defined as follows:

DANGER

An IMMEDIATE hazard that WILL result in

severe personal injury or DEATH, if warn ing

is ignored and proper safety precau tions

are not taken.

WARNING

A POTENTIAL hazard that COULD result in

severe personal injury or DEATH, if warn ing

is ignored and proper safety precau tions

are not taken.

CAUTION

Possible hazards or unsafe practices that

MAY result in MODERATE personal injury or

property damage, or machine damage, if

warning is ignored and proper safety pre-

cautions are not taken.

IMPORTANT:

Identifies mechanical information

demanding special attention, since it deals with the

possibility of damaging a part or parts of the machine.

NOTE:

Identifies information worthy of special at-

tention.

Walker Manufacturing cannot predict every poten-

tially dangerous situation. Therefore, items labeled

as such in this manual do not cover all conceivable

situations. Any person using procedures, tools, or

control techniques not recommended by Walker

Manufacturing must take full responsibility for safety.

The Walker Rider Lawnmower has been designed

with many safety features to protect the operator from

personal harm or injury. However, it is necessary for

the operator to use safe operating procedures at all

times.

Failure to follow safety instructions con-

tained in this manual may result in personal in-

jury or damage to equipment or property.

If you have any questions concerning setup, opera-

tion, maintenance, or safety, please contact your au-

thorized Walker Mower Dealer or call Walker Manu-

facturing Company at (970) 221-5614.

BEFORE OPERATING

Read and understand the contents of this

Owner’s Manual before starting and operat-

ing the machine.

Become thoroughly familiar

with all machine controls and how to stop the

machine and disengage the controls quickly. Re-

placement Owner’s Manuals are available by

sending the Model and Serial Number to:

Walker Manufacturing Company

5925 East Harmony Road

Fort Collins, CO 80528

Never allow children to operate rider mower.

Do not allow adults to operate without proper in-

struction.

Clear the area to be mowed of any foreign

objects

which may be picked up and thrown by

cutter blades. Pick up all sticks, stones, wire, and

any other debris.

4. Keep everyone, especially children and pets, a

safe distance away from the area being mowed.

Do not mow with bystanders in the area.

5. Do not operate the machine barefoot or wearing

sandals, sneakers, tennis shoes, or similar light-

weight footwear.

Wear substantial protective

footwear.

Содержание MBS26









































































































Результаты поиска

Содержание MBS26

Отзывы:

Похожие инструкции для MBS26

Бренды по названию

Популярные бренды

Walker Rider Lawnmowers MBS26, Руководство пользователя

Результаты поиска

Содержание MBS26

Отзывы:

Похожие инструкции для MBS26

Бренды по названию

Популярные бренды