Walker Bay 275 RID Скачать руководство пользователя

Страница: 5 / 8

After installing the second set of tracks proceed
with the front set of tracks.

Using wrench provided in repair kit,
hand tighten each valve.
DO NOT OVER TIGHTEN VALVE.

Inflate chambers in sequence shown until
wrinkles disappear.

Peel backing from capacity plate and apply
new plate on inside of the stern, over top
of existing plate.

WARNING

TUBE PROVIDES FLOTATION AND STABILITY.

CAPACITY LABEL IS VOID UNLESS TUBE IS INFLATED.

3rd SET OF TRACKS

Содержание 275 RID

Страница 1: ... change without notice Description Part A RID Track 2000010520 Part No 1000130023 v 2 Lscsep01 D Bolts 10 32 x 5 8 11043 E Rubberback Washers 12 11076 F Nylock Nuts 10 32 11067 G RID Tube 3001020351 H Pump 1000330002 C Repair Kit with valve wrench 3000030046 B Capacity Plate 10053 Extra bolt washer nut included for convenience ...

Страница 3: ...r To secure track to hull insert bolt and washer from inside of hull and nut from outside of hull TRACK RID TRACK ASSEMBLY INSTRUCTIONS FOR RID READY BOATS 2set of holes 1set of holes 3set of holes positioning for the tracks NOTE the distance of the holes of the track varies in the middle track in both sides of the hull 1 2 2 1 1 2 2set of holes 1set of holes 3set of holes ...

Страница 5: ...ighten each valve DO NOT OVER TIGHTEN VALVE Inflate chambers in sequence shown until wrinkles disappear Peel backing from capacity plate and apply new plate on inside of the stern over top of existing plate WARNING TUBE PROVIDES FLOTATION AND STABILITY CAPACITY LABEL IS VOID UNLESS TUBE IS INFLATED 3rd SET OF TRACKS 3 5 4 ...

Страница 8: ...RID RETROFIT TEMPLATE PORT LEFT SIDE RID RETROFIT TEMPLATE STARBOARD RIGHT SIDE ...