TUBE INSTALLATION INSTRUCTIONS
If alone, try sliding tube on with boat upside down.
Partially inflate tube (1/4 full) and apply liquid soap and water to track runner on
tube to help feed tube into track with greater ease.
Begin by sliding BOTH sides of tube halfway down first track set. (as
After installing the first set of tracks proceed with the mid set of tracks.
Don’t forget to use liquid soap for a easier sliding
shown in Illustration).
NOTE:
Before you begin the installation process, make sure your boat hull is completely
stabilized. The boat should not be able to move freely in any direction.
Before installing tube note tube’s
serial number
located in this
*
position on the
tube. You will need it to complete your
Warranty Registration Card
.
If possible, have one person feed tube into track, while other person pulls tube.
Make sure the front of the
tube is well aligned
with the front of the hull.
DO NOT FORCE TUBE INTO TRACK.
Use care when feeding tube runner
TRACK
RUNNER
into track.
1st SET OF TRACKS
2nd SET OF TRACKS
