Tools you will need:
Remove paper template.
Drill with bit #11 [3/16]
Screwdriver
RETROFIT RID TRACK ASSEMBLY INSTRUCTIONS FOR NON RID READY BOATS
Cut out template on corner of page.
Align port (left) template with outside of
port gunwale lip and first rib on aft edge.
Using a drill gun & bit #11, drill first
hole. Be careful to drill hole perpen-
dicular to hull.
Insert bolt and washer from inside
boat. From outside, attach nut
loosely, do not tighten yet.
Align track with gunwale lip and drill
Distance between the set of holes to drill.
positioning for the tracks
NOTE: the distance of the holes of the track varies in the tirhd track in both sides of the hull
remaining holes to match pre-drilled
holes in track.
Insert bolts & washers for each hole,
attaching nut loosely.
Align last hole in track
with hole drilled on boat.
1
2
1
2
2
1
1
2
26”
26”
2set of holes
1set of holes
3set of holes
2set of holes
1set of holes
3set of holes
