Walker Ameriphone XL-30, Руководство по эксплуатации

Страница: 10 / 44

4
Setting up Your XL-30
There are five steps involved in
setting up your XL-30.
• Insert one 9 Volt alkaline
battery for extra bright ring
flasher (optional).
• Decide if you want the phone
to sit on a desk or hang on the
wall.
• Connect the telephone
components.
• Program up to to 12 telephone
numbers to call with the press
of a memory button.
• Setup special features
Installing the Backup Batteries
To add extra brightness to the
XL-30’s ring flasher when you
receive calls, install one 9 Volt
alkaline battery (not included).
To install new battery:
1. Slide open the battery
compartment cover on the
bottom of the telephone,
(Figure 3).
2. Install one fresh battery, and
reinstall the cover.
Setting the Dialing Mode
Set the dial mode switch to
T
(tone) if
you have touch tone service. Set the
switch to
P (pulse) if you have rotary
dialing.
Connecting for Desk or Wall Mount
Desktop Use
1. Connect the telephone line
cord and the handset cord to
the telephone as shown in
Figure 4.
2. Lift the handset and listen for
a dial tone.
The phone is ready to use.
Insert
battery
here
Press in
here
to open
battery
compartment
Figure 3 - Accessing the Batteries