4.
Overview of device elements and operating elements
A
Handle
B
Casing
C
Operating and charging display
D On/off switch
E
Connecting socket for devices
F
Ventilation slots
F
Ventilation slots
G Socket for connecting cables of other
power supply units
H 12V DC connecting socket for charging
with car cable
I
Socket for charging process with power
cord
5.
Quick-start guide
NOTE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Maintain the order of the following operating steps when using the device for
the first time to avoid damaging the device.
WARNING
Please pay attention to the safety notes in the respective chapters
throughout operation.
1.
Connect Power Station to power network for charging.
2.
Connect device to Power Station.
3.
Use Power Station with other power supply units.
6.
Prepare Power Station for operation
6.1.
Connect Power Station to power network
WARNING! Please pay attention to the safety notes from pages 4-7
Charging process with the power cord
Please plug the power cord into the socket of the
Power Station and connect the cord to your
power network.
NOTE: Compare the local power network with the connected load of the
device. If the values differ, please contact [email protected] or tel. +49
(0) 8432-94890.
The Power Station starts charging right away.
Charging display “Charging” flashes green and the ventilators run.
Once the Power Station is fully charged, the charging display lights up
green.
10
9
C
F
E
D
F
H
G
I
F
E
8
B
A
