NOTE: While the Power Station is charging, no devices can be
commissioned. The display “Protection” on the Power Station lights up and
a beep can be heard at frequent intervals.
Charging process with the 12V DC car cable
Plug the 12V DC cable into the socket of the Power
Station and connect it to the socket in your car, e.g.,
the cigarette lighter.
The Power Station starts charging right away.
Charging display “Charging” flashes green and the ventilators run.
Once the Power Station is fully charged, the charging display lights up
green.
NOTE:
While the Power Station is charging, no devices can be
commissioned. The display “Protection” on the Power Station lights up and
a beep can be heard at frequent intervals.
6.2.
Connect devices to Power Station
WARNING!
Please pay attention to the safety notes from pages 4-7
Plug power cord of the device into the
socket on the Power Station.
NOTE: You can use one to two flash and
electrical devices up to a maximum of 1000W
(e.g., two flash devices of 500W each or a flash device of 1000W).
6.3.
Use Power Station with other power supply units
Use connecting cable to connect between the designated socket on
the Power Station and another power supply unit.
7.
Switch Power Station on and off
1.
Switch Power Station on:
Set on/off switch to I (ON).
2.
The display “Power” lights up green.
If the display “Power” lights up orange, the Power Station is weakly
charged. If the display “Protection” lights up red and a beep can be
heard at frequent intervals, the Power Station has to be recharged.
Switch Power Station off:
Set on/off switch to 0 (OFF).
3.
All displays disappear.
8.
Transportation and storage of Power Station
Switch off Power Station.
See
Switch Power Station on and off
.
Please allow for Power Station to cool down completely.
WARNING!
Danger of fire due to hot device components. Allow for
device to cool down completely.
If needed, please clean Power Station. See
Cleaning the Power Station.
Please put Power Station and all dismantled elements into original
packaging and transport or store according to requirements of the
technical specifications. See
Technical Specifications.
9.
Solve problems
Problem
Possible cause
Solution
Power Station is
switched on, but
shows no function
Power Station is
not or not
sufficiently charged
Charge Power Station
16
11
10
