8
6.
Preparation for operation
6.1
Mount on lamp tripod
ADVICE:
Please note the user information of the tripod manufacturer.
WARNING
Select a tripod of suitable weight and dimensions. See
Technical specifications
.
Make sure, that the tripod with the mounted device has a tilt and skid resistant stand.
Loose locking knurl.
Mount the device on the tripod.
Tighten locking knurl.
6.2
Screw lamps in and out
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamps fall down.
Just touch the lamp at the plastic socket or wear clean cotton gloves or use a clean cloth.
ADVICE:
Possible discolouration through burn marks on the lamps
.
Switch off device.
See
Switch the device on and off
.
Disconnect from power supply:
Plug out power cord.
Let the device cool down.
CAUTION!
Danger of burning on lamps. Let the device cool down for approx. 30 minutes.
Screw in lamps:
Screw in the lamps carefully and close the safety clips.
WARNING!
Danger of electric shock. Always screw in all lamps as to avoid touching in the
sockets, when the device is switched on.
Screw out lamps:
Open the safety clips, screw out the lamps carefully and store them securely.
6.3
Connect to power supply
Switch off device.
See
Switch on and off of the device
.
Compare the local power supply with the connected load of the device.
See
Technical specifications
.
If the values differ, please contact
or tel. 49 84 32 / 9489-0.
Connect the power cord with the socket on the device and with the power socket.
