10
9.
Solve Problems
Problem
Possible reason
Remedy
Device is switched on,
but has no function
Power cord is not plugged
or plugged incorrect
Plug in the power cord correctly
Micro-fuse is defect
Change micro-fuse, see
Change micro-
fuse
Lamps do not light up
Lamps are switched off
Switch on lamps, see
Screw in and out
of lamps
Lamps are not screwed in
firmly
Screw the lamp more firmly into the
socket
Lamp is defect
Change the lamp, see
Screw in and out
of lamps
10.
Maintenance
10.1
Continuous inspections
What you should do?
Before every
operation
With every
change
Check all cables and plugs for damages.
In case of damage:
WARNING!
Danger of electric shock and fire through
short-circuit. The device should be repaired by an
electrician immediately.
X
Check, if the lamps are screwed in firmly.
In case of damage:
WARNING!
Danger of electric shock and fire through
short-circuit. The device should be repaired by an
electrician immediately.
X
10.2
Cleaning
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamps fall down.
Don´t touch the lamp with bare hands. Just touch the lamp at the plastic socket or wear clean
cotton gloves or use a clean cloth.
WARNING
Danger of electric shock
The contact with moisture or water should be avoided.
Unplug the power cord before cleaning the device.
ADVICE: Just use the following specified cleaning supllies.
