Walimex Pro Operator TTL T-N, Инструкция по эксплуатации

Страница: 23 / 26

45 46
7.9 Setting the sync speed mode
In <Gr> mode, flash shutter speed can be set to first curtain sync, second cur -
tain sync, or high-speed sync.
Briefly press the [SYNC/CH] button; first curtain, second curtain, and high-
speed sync are selectable in sequence.
When mount Walimex pro Operator TTL T-N transmitter on Nikon camera,
it automatic recognizes and reflects camera’s shutter sync speed. You only
need to adjust shutter sync speed on camera.
Take Nikon D90 as an example, when the camera‘s shutter sync speed is
faster than 1/200 s; Walimex pro Operator TTL T-N transmitter shows high-
speed synchronization icon on screen.
When Nikon D90’s shutter speed of the camera is equal to or slower than
1/200 s, Walimex pro Operator TTL T-N transmitter automatically displays the
front or rear curtain sync mode according to the settings on the camera.
Different series of Nikon cameras have different shutter speed cutoff value.
Walimex pro Operator TTL T-N transmitter will automatically identify the shutter
speed cutoff value based on the camera‘s own settings, and shows correspon-
ding sync speed icon.
Choose AUTO FP on camera to use high speed sync
Only when shutter sync speed on Nikon camera is set to “1/250 (AUTO FP)”
or “1/320 (Auto FP)” or “AUTO FP”, high speed sync of transmitter will be
effective.
Please refer to following steps to realize “high speed sync”.
1. Slip the transmitter’s mounting foot fully into the camera’s hot shoe. Rotate
locking ring clockwise, to attach transmitter on camera firmly.
2. Turn on Camera. Choose “M” manual mode” or “S” shutter priority mode by
turning the mode dial.
3. Press the [MENU] button on camera, choose [CUSTOM SETTING MUEU],
and select [Bracketing/flash].
4. Select [Flash sync speed] .
5. Select Flash sync speed 1/250 (AUTO FP) or 1/320 (Auto FP), or turn on
[Auto FP] .
The setting screen varies depending on the camera.