Walimex Pro Flex LED 500 Bi Color, Инструкция по эксплуатации

Страница: 16 / 20

30 31
7. Prepare the device for use
7.1 Mounting and connecting the battery
The walimex pro Flex LED lights are equipped with a Sony V-Mount / Anton
Bauer compatible battery slot. The device can be operated either by battery
or cable power. The battery slot is located on the back side of the power
control unit.
• Set the ON / OFF switch on the control
unit (7) to the <0> position to switch off
the device.
• Insert a suffi ciently charged, compatible
battery from left to right into the battery
slot (15).
• A click of the battery lock (16) usually
signals the save locking of battery.
• Set the ON / OFF switch on the control
unit (7) to the <I> position to set the
battery operation mode on the unit.
• The unit is ready for battery operation.
• To remove the battery, press the unlock
button (16) of the battery slot and remove
the battery by pulling it out to the left.
Note
The device must be equipped with a suffi ciently charged battery for operation.
The control unit has a charge control indicator for the used battery. If the inserted
battery is too much discharged, the control unit does not function in the battery
operation mode. Charge the battery before use in the led light and note the inst-
ructions for use. When operating with cable power (switch position <II>), a full bat-
tery status is indicated in the display. The display does not show the correct, actual
battery charge status during cable operation mode. The correct battery charge
indicator function is generally only available when the battery mode is selected
(switch is set to <I>) and the battery is suffi ciently charged.
Recommendations for using your battery
• Change the battery, at the latest, when the light starts to fl icker.
• Switch the device off before removing the battery.
• This also applies for changing or adding another battery in models with
several battery mounts. Switch the light off before adding or changing the
battery, and do not insert other batteries into the mount while the light is
being used.
• Do not let the battery charge level go too low, and charge up your battery
as soon as possible. This ensures the longer battery life.
• Please remove the battery from the battery mount while transporting or
storing the device. This is to prevent damage to the battery mounts during
transportation and prevents the battery becoming uncharged unintentio-
nally.
• To maintain the performance of your battery, we recommend letting the
battery run down completely and then recharging it around once a month.
• Please remove the battery from its mount after using your device.
7.2 Preparing the device for use, connection for cable operation mode
1. Set the ON / OFF switch on the control unit (7) to the <0> position to switch
off the device.
2. Connect the power cable of the light mat (2) to the connection cable of the
power control unit (7).
3. Connect the XLR plug of the power supply unit (17) to the power supply
socket of the control unit (13).
4. A click indicates the lock of the safety lever of the XLR connector of the
power supply.
5. Connect the power cable to the power adapter.
6. Connect the power cable with the power adapter (AC 220-240V / 50Hz).
7. Set the ON / OFF switch on the power control unit (7) to the <II> position to
set the cable power mode.
8. The LED panel light is now ready for use.
9. Procedure of the power supply in reverse order for removal.