Wali GSMP001W, Руководство по установке

Страница: 6 / 8

6
Step 3
Mark the position of the hole on your mounting surface. Drill
a 3/8"(10mm) diameter hole at the marked position through
the mounting surface. Insert the assembled Bolt H through
the desk hole, guide the Support Plate I and Nut G
through the Bolt H , rotate the Nut G clockwise to fasten
for stability.
A
Put the assembled TV/Monitor onto the Arm A and ensure the stability, tighten the VESA plate using Top Screw.
Step 4
Press the Arm A on horizontal level as image shown, adjust gas spring tension to your personal preference using Allen
Key 5mm K , adjust the tilt tension using Allen Key 5mm K .
A
K
K
For Heavier Monitors
For Lighter Monitors