Waldorf STVC, Быстрый старт

Страница: 19 / 22

The Control Panel
19 STVC Quickstart
r
Note that only 2.4 V phantom power is supplied,
microphones requiring 48 V or 12 V are not sup-
ported.
Freeze Button
Press and hold the Freeze button to record the
microphone singal. To specify this, only the filter
coefficients, not the audio signal itself is recorded. The
recorded signal is then played back in a loop. With the
Save function you can save the audio loop, so that it
remains after switching off. Otherwise everything is gone
after switching off the STVC. Keep in mind that only one
audio loop can be saved.
r
The maximum recording capacity depends on the
incoming audio signal and should be about 20
seconds.
r
If you want to use a recorded Freeze signal again,
press both the
Vocoder and the Freeze button.
Otherwise a new recording procedure starts and
overwrites the internal memory.
The Effects Section
The effect section offers three
effects, which can be used simulta-
neously.
Effect Selector
This switch selects which effect can
be adjusted by the
Depth and Rate
dials. Note that all three effects can
be combined simultaneously.
•
Animate: A Low Frequency
Oscillator (LFO) modulates the
Strings registration. Depth and rate
are controlled by the
Depth and
Rate potentiometers.
•
Phaser : Classic phase shifter
effect. Feedback and depth are
adjustable with
Depth according to
the most pleasing settings we could
find. Rate is controlled, as you can
certainly understand it, by
Rate .
•
Reverb : Reverberation with
adjustment of size and dampening
of the ambient room according to