25
Gas Conversion and Specifications
Oven
Main Injector
a. With the gas supply turned off at the main supply,
unscrew and remove the 6 screws securing the
lower lintel to the front of the oven.
b. Remove the lintel from the oven.
c. Open the oven door and remove the cast sole plate
from inside the oven. (Refer to Fig 31).
d. Remove the screw securing the oven burner to the
floor of the oven. (Refer to Fig 32).
e. Slacken the 2 screws securing the burner clamp
bracket at the front of the oven, (Refer to Fig 34),
this will allow the burner to be removed out of the
front of the oven.
f. The main burner injector will now be exposed and
can be unscrewed and removed. (Refer to Fig 33).
g. Remove the main injector and replace with the
correct size injector. (Refer to the ‘Gas
Specifications’ table at the rear of this section).
h. Refit the main burner and secure the burner and
burner clamp bracket to the oven. (Refer to Fig 32
and Fig 34).
Pilot Injector
a. To remove the oven pilot injector, remove the two
screws securing the pilot burner bracket to the front
of the oven. (Refer to Fig 34).
b. Remove the pilot burner bracket from the front of
the oven (Refer to Fig 35), unscrew and remove the
piezo igniter from the mounting bracket to allow
better access to the pilot supply tube.
c. Unscrew the hex nut holding the pilot supply tube
to the rear of the pilot assembly.
d. Withdraw the pilot injector from the pilot assembly.
e. Replace the pilot injector with the correct sized
injector for the gas type being used and re-connect
the pilot supply tube to the pilot assembly.
f. Refit the piezo igniter to the mounting bracket.
g. Refit the pilot burner mounting bracket to the front
of the oven and secure to the front of the oven with
2 screws. (Refer to Fig 34 and Fig 35).
Low Fire
(Convection Oven)
:
Please note that there is no low fire adjustment
on the gas control valve for the GC Oven.
Remove screw
Fig 32
Main Burner
Injector
Fig 33
Pilot Supply Line
Thermocouple
Piezo Igniter
Pilot Assembly
Fig 36
Loosen screws and
slide clamp bracket
left to remove burner
Fig 34
Pilot Burner
Bracket Securing
Screws
Fig 35
Pilot Burner Bracket
partly removed
Pilot Supply Line
Thermocouple
Piezo Igniter
Pilot Assembly
Pilot Burner
Viewing Holes
Pilot Burner
Inspection Covers
Sole Plate
Fig 31
Содержание RNL8510GC
