7
Installation
Installation Requirements
NOTE:
It is most important that this appliance is installed correctly and that operation is correct
before use. Installation shall comply with local gas, electrical and health and safety
requirements.
This appliance shall be installed with sufficient ventilation to prevent the occurrence of
unacceptable concentrations of health harmful substances in the room, the appliance is
installed in.
Waldorf Target Top Range Convection Ovens are designed to provide years of satisfactory service and
correct installation is essential to achieve the best performance, efficiency and trouble-free operation.
This appliance must be installed in accordance with National Installation Codes and in addition, in
accordance with relevant National / Local Codes covering gas, electrical and fire safety.
Australia / New Zealand:
- AS/NZS5601 - Gas Installations.
United Kingdom:
- Gas Safety (Installation & Use) Regulations 1998.
- BS7671
- Requirement for Electrical Installation.
- BS6173
- Installation of Catering Appliances.
- BS5440
- 1 & 2 Installation Flueing & Ventilation.
Ireland:
- IS 820
- Non - Domestic Gas Installations.
Installations must be carried out by authorised persons only. Failure to install equipment to
the relevant codes and manufacturer’s specifications shown in this section will void the
warranty.
Components having adjustments protected (e.g. paint sealed) by the manufacturer are only
to be adjusted by an authorised service agent. They are not to be adjusted by the installation
person.
Unpacking
Remove all packaging and transit protection from appliance including all protective plastic coating
from exterior stainless steel panels.
Check equipment and parts for damage. Report any damage immediately to carrier and distributor.
Report any deficiencies to distributor who supplied appliance.
Check available gas and electrical supply is correct to as shown on rating plate located on front right
hand corner of bottom sill.
Location
1.
Installation must allow for a sufficient flow of fresh air for combustion air supply.
2.
Installation must include adequate ventilation means, to prevent dangerous build up of combustion
products.
3.
Never directly connect a ventilation system to appliance flue outlet.
4.
Any gas burning appliance requires adequate clearance and ventilation for optimum and trouble-free
operation. Minimum installation clearances shown overleaf are to be adhered to.
5.
Position appliance in its approximate working position.
6.
All air for burner combustion is supplied from beneath appliance. Legs must always be fitted to
appliance and no obstructions placed beneath or around base of appliance, as obstructions will
cause incorrect operation and / or failure of appliance.
NOTE: Do not obstruct or block the appliance flue. Never directly connect a ventilation system to
appliance flue outlet.
Combustion Air Requirements:
Natural Gas
20 m
3
/hr
LPG / Butane
20 m
3
/hr
Town Gas
20 m
3
/hr
Содержание RN8110GC
Страница 8: ...6 Dimensions RN L 8110GC...
Страница 29: ......
