7. Installation
7. Installation
Installation
●
set up the MIDI BAY at a place where it is not
exposed to strong vibrations, dust or extreme
humidity. Connect the unit to the mains.
➔
the MIDI BAY may also be installed within a 19"
rack. The required bolts are not enclosed.
●
now connect the MIDI OUT jacks of all units
transmitting MIDI signals (master keyboards, MIDI
drum pads and guitar control lers, synthesizers,
samplers, etc.) to the [Source] connectors of the
MIDI BAY.
Please observe the following:
If you use the merge function, the signals from [Source
1] and from an additional, freely selectable [Source]
connector will be mixed. Furthermore, you can send
program change instructions to the MIDI BAY via
[Source 1]. Therefore, your master instrument, or your
computer respectively, the data of which you want to
merge with the data coming from other MIDI units, must
be connected to [Source 1].
●
now connect the [Destination] jack of the MIDI BAY
to the MIDI IN connectors of all units/instruments you
want to control. For reasons of clearness, we
recommend you to connect all units that
communicate in both directions with the MIDI BAY to
connectors with identical numbers.
Now you may start "patching", i.e. start programming
the MIDI connections.
MIDI BAY Manual
