10. Selecting Programs
10. Selecting Programs
Selecting Programs
There are three ways to switch over between the
programs of the MIDI BAY. The unit must always be in
PLAY Mode.
Changing programs on the unit:
use the [Up] and [Down] keys to select a MIDI BAY
program.
Changing programs via foot switch:
especially in live situations, you often need a "third
hand" to select a new program. With the help of a
simple foot switch - also used as sustain pedal on most
synthesizers -you may advance the MIDI BAY from one
program to the next one.
Connect such a foot switch to the [Footswitch] jack of
the MIDI BAY and place it in such a way that you will
not get it confused with the sustain pedal. It would be
exasperating if you want to keep a chord but would
'choke off your entire MIDI system.
➔
use the MIDI BAY's COPY function (see chapter
12) to arrange the individual programs in a
reasonable order for live performances.
Changing programs via MIDI:
you may also send a program change instruction from
another MIDI device to the MIDI BAY. For this purpose,
set the MIDI BAY to the channel on which these
instructions are sent.
●
depress the [Mode] key four times to activate the
CHANNEL Mode.
●
using the [Up] and [Down] keys, you can then adjust
the receive channel for the program change
instructions. Apart from channels 1 through 16 you
may also use the <oF> setting which will block any
program change instruction.
MIDI BAY Manual
