Waldbeck 10030932, Руководство пользователя

Страница: 24 / 28

Cleaning and Maintenance
After use instructions
The machine should be stored in a frost-free room!
Pump, hose and accessories should always be emptied of water prior to storing as follows:
Stop the machine (press the start/stop switch “O” and detach water hose, high pressure
hose and nozzle�
Restart the machine and activate the trigger of the trigger gun Let the machine run until
no more water runs through the trigger gun
Stop the machine, unplug and wind up hose and cable�
Place trigger gun, lance, nozzles and other accessories in the holders of the machine� The
hook can be used for storage of the hose and cord
5, All accessories can be stored in the washer after using�
Place trigger gun, lance, nozzles and other accessories in the holders of the machine� The
hook can be used for storage of the hose and cord 5, All accessories can be stored in the
washer after using�
WARNING: Never start up a frozen machine. Frost damages are not covered
by the guarantee!
Cleaning
Warning : Danger of electric shock
Always disconnect the electrical plug from the socket prior to maintenance or
cleaning�
Spray lance and accessories before mounting�
Clean the connectors of dust and sand�
Rinse the detergent spraying attachment after use�
Clean the nozzles
1. Cleaning of inlet filter
Clean the water inlet filter regularly once a month or more frequently according to use.
Carefully loosen the filter with a screwdriver and clean it . Check that it is intact before
re-mounting it�
The inlet filter must always be fitted inside the water inlet pipe to filter out sand, limestone
and other impurities, as they will damage the pump valves�
Beware: Failure to fit the filter will invalidate the warranty.
2� Cleaning of air vents
The machine should be kept clean so as to let cooling air pass freely through the machine
24