![background image](http://html1.mh-extra.com/html/waldbeck/10030404/10030404_manual_3170089013.webp)
Note: Pre-drilled holes through the floor of the tray allow rainwater to drain and keep tools
from rusting.
Step 9
Centre the basket between the back wheels, lining up the bottom of the Basket with the
bottom of the back axle. Attach the basket with two 8x20mm bolts, nuts, washers and
large reinforcing plate. Line up the plate and hardware with the holes in the pre-welded
bracket located on the back of the frame (Figure 5). Use pliers and a wrench to fully
tighten the bolts until the Basket is securely in place.
Step 10
Attach the seat to the seat post with four 10x15mm bolts, nuts and washers. Use pliers
and a flat head screwdriver to fully tighten the bolts in place. Note that the threaded stern
of the seat post has a washer and cotter pin pre-installed. Check by looking under the seat
to make sure the cotter pin is wrapped around the axle and secure (Figure 6).
The seat may be raised or lowered to a desired height simply by turning it clockwise or
counterclockwise. For the most comfort, we recommend adjusting the seat to a height
where your feet rest level on the ground and your legs are parallel with the ground.
Producer: Chal-Tec GmbH, Wallstr. 16 10179 Berlin, Germany
13
Содержание 10030404
Страница 1: ...10030404 Fahrbarer Arbeitsstuhl...
Страница 3: ...Teileliste 3...
Страница 9: ...Parts List 9...