28
I/O Board wiring labels
I/O Boards 1 through 4
I/O Board 1-4
Terminal Blocks
I/O Board P/N
Identification Labels
Notes:
Identify P/N 191918 I/O Board and connect wires to the terminal blocks directly below the I/O slot that the board is in.
Use the wiring label located on the front panel that has a matching I/O part number.
Either channel can support any of the sensor types listed.
Each analog output is internally powered, 15 VDC, fully isolated.
To program the analog input, go to the Inputs menu, enter the menu for the I/O slot# and channel# (for example S21). Scroll to
Transmitter and select the type of transmitter from the list.
Input
Channel 1
Output Channel 1
I/O Board Part Number
P/N 191918 4-20 mA INPUT (2)/OUTPUT (4)
TBxA - INPUT 1, OUTPUTS 1-2
TBxB - INPUT 2, OUTPUTS 3-4
TB Ch
4 Wire 4-20 mA
Output
In
1,2
COM(–) 24V(–)
Out
1,3
XMTR–
XMTR+
XMTR–
XMTR+ XMTR+
XMTR–
+24V
+24V
+24V
OUT–
OUT+
OUT+
OUT–
3 Wire
2 Wire
Pwrd
2 Wire
Loop
1
3
5
7
9
10
11
12
13-18
2
4
6
8
Out
2,4
P/N 191918 4-20 mA INPUT (2)/OUTPUT (4)
TBxA - INPUT 1, OUTPUTS 1-2
TBxB - INPUT 2, OUTPUTS 3-4
TB Ch
4 Wire 4-20 mA
Output
In
1,2
COM(–) 24V(–)
Out
1,3
XMTR–
XMTR+
XMTR–
XMTR+ XMTR+
XMTR–
+24V
+24V
+24V
OUT–
OUT+
OUT+
OUT–
3 Wire
2 Wire
Pwrd
2 Wire
Loop
1
3
5
7
9
10
11
12
13-18
2
4
6
8
Out
2,4
Output Channel 2
See 191913 wiring instructions for details
I/O Board Part Number
Input
Channel 2
Output Channel 3
Output Channel 4
See 191913 wiring instructions for details
1
2
3
4
5
6
7
8
9
10
11
12
–
+
SHIELD
–
+
SHIELD
Chart Recorder,
PLC, etc.
Chart Recorder,
PLC, etc.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
–
+
SHIELD
–
+
SHIELD
Chart Recorder,
PLC, etc.
Chart Recorder,
PLC, etc.
Figure 15 Part Number 191918 Dual Analog (4-20mA) Input + Four Analog (4-20mA) Output Wiring
