ac power cord and remove the system backup battery, wait for at least 3 minutes and
then setup the unit again as if it is a brand new unit.
TECHNICAL SPECIFICATIONS
Power Adaptor:
• Input AC 100-240V / 50- 60 Hz
• Output DC 5V 1500mA
Power consumption
• 5W
Standby power consumption
• <1W
Battery backup
• 3V (CR2032 Flat Lithium battery x 1) not included
Radio Frequency
• FM: 87.5MHz - 108 MHz
1. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
2. Do not place the product in closed bookcases or racks without proper ventilation.
3. Where the mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.
4. The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
7. The unit should not be exposed to direct sunlight, very high or low temperature,
moisture, vibrations or placed in dusty environment.
8. Do not use abrasive, benzene, thinner or other solvents to clean the surface of the
unit. To clean, wipe it with mild non-abrasive detergent solution and clean soft cloth.
9. Never attempt to insert wires, pins or other such objects into the vents or opening of
the unit.
10. Disconnect device warning : Mains plug is used as the connection, so it should
always remain ready operate.
11. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
12. Class 1 LED product.
CAUTION
Danger of explosion if battery is incorrectly replaced
Replace only with the same or equivalent type of battery
