PREPARATION FOR USE
AC-DC adaptor connection : The clock radio unit can be powered by an external
AC-DC adaptor, required the output DC 5V 1.5A (included).
POWER CONNECTION
Plug the AC-DC adaptor to a household outlet AC source, connect the adaptor’s DC
output plug to the DC IN Jack of the clock unit. This unit is equipped with a battery back
up system; it requires a 3V flat lithium battery “CR2032” (not included). Insert the
battery in the battery compartment, making certain that the positive and negative
(+and-) battery terminals are attached to the corresponding terminals on the plate in the
battery compartment. If an AC power failure occurs, the clock automatically switches to
the battery power supply, the clock and timer memory continue running. When the AC
power resumes, the clock switches back to AC again.
TIME MANUAL SETTING
With the radio OFF mode, press and hold the SET / MEMORY button (8); “24 Hr” will
blink. Press the SKIP FORWARD (5) or SKIP BACK (4) button to set the unit to the 12
hour (12 Hr) mode or 24 Hour (24 Hr) mode. Press the SET / MEMORY button (8) to
confirm and the hours will blink.
Press the SKIP FORWARD (5) or SKIP BACK (4) button to set the current hour, then
press the SET / MEMORY (8) button again to confirm the hour; then the minute digits
will blink. Press the SKIP FORWARD (5) or SKIP BACK (4) button to set the current
minutes.
When done, press SET / MEMORY (8) button once again to indicate the current time is
set.
SETTING ALARM TIME
To preview the alarm time. Press the ALARM button (6/7) once.
While the display is showing the alarm time and you hold the ALARM button (AL.1 /
AL.2) for 3 seconds and the hours will blink.
Press the SKIP FORWARD (5) or SKIP BACK (4) button to set the alarm hour.
Press the ALARM button (AL.1 / AL.2) again; the minute digits will blink. Press the SKIP
FORWARD (5) or SKIP BACK (4) button to set the alarm minutes.
Press the ALARM button (AL.1 / AL.2) and you can change the sound mode (Buzzer or
Radio) for the alarm.
