www.wahsega.com
Page 21
RTP
Port Range
–
Select the UDP port range to use for sending RTP
audio network traffic during a call.
SNMP
SNMP Enabled
–
SNMP is required to control relays in the
speaker.
The
speaker’s
relays cannot be used while SNMP is disabled
,
so be sure to check this box if you may be using relays.
Port
–
The port number used for SNMP.
Read-only community string
–
The community string that will
allow read-only access to SNMP variables on this device. SNMP
community strings are sent in plain-text, so
do not re-use a
password that’s used for any secure logins or devices!
Read-write community string
–
The community string that will
allow read-write devices to access the SNMP variables on this
device. SNMP community strings are sent in plain-text, so
do not
re-
use a password that’s used for any secure logins or devices!
