Wahlberg Winch 10 Cable, Руководство пользователя

Страница: 10 / 46

213.805.022 10 Date: 2022-09-19
Using for the first time
IMPORTANT! The Winch 10 cable must be protected from environmental factors such as
physical shocks and vibration during storage.
WARNING 3. before installing, powering, operating, or
servicing the winch. Before applying power to the winch:
Check the Wahlberg Motion Design website at www.wahlberg.dk for the most recent
documentation and technical information about the winch 10 cable. Wahlberg user manual
revisions are identified by the revision number in the bottom of each page.
3.
Check that the local AC mains power source is within the winch power voltage and
frequency ranges.
ables and 3. Install a Neutrik powerCON TRUE1 NAC3FX-
W power input connector on a suitable power cable. If using the power from a mains power
outlet, install a suitable power plug on the power cable.
Transport
IMPORTANT! The Winch 10 cable must be protected from environmental factors such as
physical shocks and vibration during transportation.
Before transport, it is important to roll the lifting cable of the winch up till the hard TOP limit so a
maximum of 5 cm (1.9 inch) remains out of the winch. If the lifting cable is slack it may jump off
the lifting cable drum during transport and cause damage to the winch.
Use only the original packaging, flight case, or pallet frame for protecting the winch during
transport. Contact Wahlberg for enquiries regarding flight cases or pallet frames.