Wahlberg TrackRunner Upright, Руководство пользователя

Страница: 13 / 28

356.805.003
13
Date: 2019-04-04
Data link
A DMX 512 data link is required in order to control the product via the Wireless DMX transmitter
[
A ] (ordered separately) and the TrackRunner Upright [ B ] has a 5-pin XLR connector [ C ] for DMX
data output connected to the equipment mounted on the unit [ D ]. The pin-out on all connectors
is pin 1 = shield, pin 2 = (data -), and pin 3 = (data +). Pins 4 and 5 in the 5-pin XLR connectors are
not used but are available for possible additional data signals as required by the DMX512-A
standard.
Radio Control
WARNING! This equipment can cause radio interference, make sure this equipment respects
all national and local regulations before use.
CAUSION: Change or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The product has a build-in in CRMX wireless DMX to control the operation, and the radio device
uses the 2.4 GHz band as accepted in Europe and USA. For other locations and national restrictions
consult your national authority.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a given
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
A
B
C
D
Wireless link